电火花专用电蚀铜

典型牌号

Typical grade

number

产品名称

Product name

特性

Features

应用

Application

T1

纯红铜

Pure red copper

高纯度、组织细密，含氧量极低，无气孔、沙眼，导电性能佳电蚀出的模具表面光洁度高。经热处理工艺，电极无方向性适合精打、细打。密度:8.9g/cm 电导率:>58.5MS/m 硬度:>85.2HV

High purity,compact texture,low oxygen content.no gas cawity.excellent electrical conductivity.high finish degree of the sunacaof directivety.suitable for precise and fine processingDensity:8.9g/cm3Electrical conductivty:>58 5uS’m Hardness:>85 2HV

冲压模、塑胶模、橡胶模、压铸模拉链模等。

Punching mold,plastic mold.rubber mold.casting mold.and zipper mold

TAg0.1

银铜电极

Silver-coppaelectrode

电蚀速度快、高精度、低损耗、精加工与细加工可一次完成是精密制模的理想材料。密度:8.91g/cm 电导率>58.5MS/m硬度:>99.3HV

High speed electrical erosion,high precision,low wear andrear.precise and fine processing can be done at the same time;

it is the ideal materia for precise mold.

Density:8.91g/cm3 Electricai conductivty.

>56.8MS/m Hardeness:>99.3HV.

塑胶模、轮胎模、制毛模、压铸模、等精密模

plastic mold. tyre mold.

rubber mold. pen mold,

casting mold,

and other precise mold,